WAGO 857-420 Feeding Isolator Content: 1 pc(s)
The six millimetres flat isolation amplifiers are not only absolutely same as contour but also the continuous bridgeable connections for the supply voltages, etc. are always at the same position. That means simply bridges instead of individual wires....
WAGO 857-420 JUMPFLEX® Transducer Repeater power supply configurab...
WAGO-Feeding-Isolator-WAGO-857-420-p-The-WAGO-Feeding-Isolator-is-a-high-quality-repeater-power-supply-configurable-with-current-and-voltage-output-The-6mm-flat-isolation-amplifiers-are-not-only-the-same-contour-but-also-the-continuous-bridgeable-connections-for-the-supply-voltages-are-always-at-the-same-position-meaning-simple-bridges-instead-of-individual-wires-With-the-galvanic-separation-all-inputs-outputs-and-supply-circuits-are-separated-with-a-testing-voltage-from-2-5kV-Confi
WAGO 857-423 Signal Duplicator Content: 1 pc(s)
Signal duplicator with 2 configurable current outputs. Configuration via DIP switch
WAGO 857-500 Frequency Measuring Transducer Content: 1 pc(s)
The frequency collects 0.1 Hz to 120 kHz signals from NAMUR, NPN or PNP sensors and converts the frequencies into analogue standard signals.
WAGO 857-500 JUMPFLEX® Transducer Frequency Transducer 0.1 Hz ... ...
WAGO-Frequency-Measuring-Transducer-WAGO-857-500-p-The-WAGO-Frequency-Measuring-Transducer-has-a-frequency-that-collects-0-1Hz-to-120-kHz-signals-from-NAMUR-NPN-or-PNP-sensors-and-converts-the-frequencies-into-analogue-standard-signals-Safe-3-way-isolation-with-2-5kV-test-voltage-to-EN-61140-p-WAGO-857-500-JUMPFLEX-Transducer-Frequency-Transducer-0-1-Hz-120-kHz
WAGO 857-550 JUMPFLEX® Transducer Current Transducer AC/DC 0 ... 1...
WAGO-Current-Measuring-Transducer-AC-DC-0-1A-0-5A-WAGO-857-550-p-The-WAGO-Current-Measuring-Transducer-AC-DC-0-1A-0-5A-is-used-to-measure-AC-and-DC-currents-AC-DC-0-1A-as-well-as-AC-DC-0-5A-It-can-record-sinusoidal-and-optionally-also-non-sinusoidal-signals-true-RMS-measurement-The-current-transducer-converts-the-output-current-into-an-analogue-standard-signal-p-WAGO-857-550-JUMPFLEX-Transducer-Current-Transducer-AC-DC-0-1-A-0-5-A
WAGO 857-800 Configurable Temperature Measuring Transducer For Pt-sensors And Resistors
Configurable temperature transmitters for Pt 100, Pt 200, Pt 500, Pt 1000 and resistors 0-1 kΩ, and 0 - 4.5 Ohms. The control is via DIP switch
WAGO 857-810 Configurable Temperature Measuring Transducer For Thermocouples Type J And K .
Configurable temperature measuring transducers for thermocouples type J and K. Configured through DIP switches.
WAGO 857-810 JUMPFLEX® Temperature Transducer Light Grey
WAGO 857 Series Temperature Transducers - WAGO 857-810, This temperature signal conditioner from WAGO records signals from type J and K thermocouples and converts the temperature signal into a standard analog signal on the output side.. Configured through...
WAGO 857-811 JUMPFLEX® Temperature Transducer Light Grey
WAGO 857 Series Temperature Transducers - WAGO 857-811, This temperature signal conditioner from WAGO records signals from type J and K thermocouples and converts the temperature signal into a standard analog signal. Configured through DIP switch or the...