Always needed if several motors are operated with a switch or a timer. With central entrance for central command and connection possibility for a single operation. Only 22 mm high! Can be integrated into the deep switch box
The multiple control device has a umpollogik to low-voltage motors to operate (direction reversal of 24 V/DC motors). Cut-off current as well as response time are adjustable.This text is machine translated.
The control unit is ideal as an on-site isolation relay in systems with central and single command. The device offers the option, shutters and blinds with all amenities. The central command works in Totmannbetrieb, as this is already mostly from a central...
Mehhrfachsteuergerat 230 V in the top-hat rail design. The device can be used as isolating relays or group control unit. There are 2 motors can be connected and a group and a single operation.This text is machine translated.
This limit switch for monitoring wind is universally used. In conjunction with the wind sensor, wind strengths from 2 to 8 can be captured. Exceeding the set wind strength is immediately indicated by an LED. After the lapse of the set switch-on delay,...
The exceeding of the adjusted sensitivity is immediately displayed by the LED. At the same time the relay contact is activated. Depending on the setting, the relay remains active only for either 2 seconds or it will be permanently switched during the...
REG-Control is a very comfortable and affordable home-wide guidance for window blinds and shutters, if taken into account in the planning phase of new construction or conversion benefits. So you can control the blinds shutter-time and sensor-control all...
For standard shutters, to fasten the shutter to the shaft. Use one spring for every 40 cm shutter width. Suitable for order no. 62 00 91.
Quiet and fast-running motors with high reserves, which ensure a very long life. They are maintenance free and have a 2m loop . The endpoints can be easily set on 2 spindles.
Fast and silently running motors with high reserves guarantees longer duration. Provided through 2 m connection power without any maintenance. The end points can be easily set via 2 spindles.