Seeed 101020028 Grove - Thumb Joystick 3.3-5V
Seeed Grove - User Interface and Control Modules - Seeed Studio 101020028, The Grove Thumb Joystick from Seeed Studio has two analogue outputs, one each for X and Y. The stick also has a push button, when it is pressed the analogue lines are set to maximum,...
Seeed 101020030 Grove - Digital Light Sensor I2C Includes Infrared...
Seeed Grove - Environmental Sensor Modules - Seeed Studio 101020030, The Grove Digital Light Sensor from Seeed Studio gives you three detection modes, infra-red only, visible light only , and the two combined. The sensor returns a 16-bit value for the...
Seeed 101020031 Grove - Piezo Vibration, Impact and Touch Sensor
Seeed Grove - Physical Sensor Modules - Seeed Studio 101020031, The Grove Piezo Vibration sensor from Seeed Studio detects vibration and outputs a logic 1 when it exceeds a threshold set by the onboard potentiometer. Applications include car alarms, security...
Seeed 101020033 Grove - Ear-clip Heart Rate Sensor
Seeed Grove Range of Sensors and Modules - Seeed Studio 101020033, Seeed 101020033 Grove - Ear-clip Heart Rate Sensor kit contains a clip and a receiver module. The heart rate measure kit can be used to monitor heart rate of patient and athlete. The result...
Seeed 101020035 Grove - Protoshield
Seeed-101020035-Grove-Protoshield-Seeed-Studio-101020035-Seeed-101020035-Grove-Protoshield-This-Grove-allows-you-to-add-your-own-circuitry-or-components-to-your-Grove-system-prototypes-It-gives-you-access-to-all-four-lines-from-the-grove-connector-cable-ndash-S0-S1-VCC-and-GND-There-is-also-a-reserved-space-for-a-normally-open-button-Standard-2-54mm-spacing-makes-it-easy-to-install-normal-DIP-format-ICs-and-other-components-onto-the-board-Seeed-101020035-Grove-Protoshield
Seeed 101020036 Grove - Slide Potentiometer
Seeed-Grove-Slide-Potentionmeter-Seeed-Studio-101020036-Seeed-101020036-Grove-Slide-Potentiometer-module-incorporates-a-linear-variable-resistor-with-a-maximum-resistance-of-10K-Omega-When-you-move-the-slider-from-one-side-to-the-other-its-output-voltage-will-range-from-0-V-to-the-Vcc-you-apply-It-connects-to-the-other-Grove-modules-through-a-standard-4-Pin-Grove-Cable-br-Three-of-the-pins-are-connected-to-OUT-Pin-1-Vcc-Pin-3-and-GND-Pin-4-while-the-fourth-pin-Pin-2-is-conne
Seeed 101020037 Grove Touch Sensor Capacitive Sensor based on TTP223-B
Seeed-Studio-Grove-Touch-Sensor-Capacitive-Sensor-Based-on-TTP223-BA6-Seeed-Studio-101020037-The-b-Grove-Touch-Sensor-b-module-is-an-ideal-alternative-for-a-mechanical-pushbutton-The-simple-device-uses-the-b-TTP223-B-b-touch-detector-IC-to-measures-the-capacitance-of-a-metallic-pad-When-a-finger-is-near-or-on-the-pad-that-sensor-detects-it-an-actuates-the-switch-br-br-As-the-sensor-detects-the-proximity-of-the-finger-as-well-as-direct-touch-there-are-many-ways-to-use-this-m
Seeed 101020038 Grove - Magnetic Switch SPST Encapsulated Reed Type
Seeed Grove - Physical Sensor Modules - Seeed Studio 101020038, The Grove Magnetic Switch from Seeed Studio contains a dry reed switch that can be activated by a permanent magnet or electromagnet. The normally open switch is connected to a digital line...
Seeed 101020039 Grove - 3-Axis Digital Accelerometer (±1.5g) Based...
Seeed Grove Motion Sensor, Control and Actuator Modules - Seeed Studio 101020039, The Grove 3-axis Digital Accelerometer from Seeed Studio measures up to ±1.5g with a resolution of 6-bits. Connect this sensor to an I2C port on a Grove main board...
Seeed 101020042 Grove - 80cm Infrared Proximity Sensor
Seeed Grove Range of Sensors and Modules - Seeed Studio 101020042, Seeed 101020042 Grove - 80cm Infrared Proximity Sensor is quite small and uses a tiny connector called the Japan Solderless Terminal (JST). These connectors have three wires: Ground, VCC,...