Eltako 21100805 Power booster Blue
Power supplement for universal dimming switches. Power MOSFET up to 400W. Stand-by loss only 0.1 watt. The load of a power additive may differ from the load of the universal dimmer switch in the power increase circuit with additional lights. This makes...
Eltako 21100810 DIN-rail dimmer
Universal dimming switch with rotary knob, power MOSFET up to 800W. Automatic lamp detection. Stand-by loss only 0.2 watt. Minimum brightness and maximum brightness can be set. Series installation device for mounting on DIN-EN 60715 TH35 mounting rail....
Eltako 21100830 DIN-rail dimmer
Universal dimming switch with automatic lamp detection. Stand-by loss only 0.1watt. Minimum brightness and dimming speed can be set. With children's room and snooze switch. 1 division unit. Universal dimming switch for lamps up to 300W, depending on the...
Eltako 21100905 DIN-rail dimmer
Universal dimming switch with automatic lamp detection. Standby loss of only 0.3 watts. Minimum brightness, maximum brightness and dimming speed can be set. With children's room and snooze switch. 1 division unit. Universal dimming switch for lamps up...
Eltako 21100906 Speed controller
Digitally adjustable motor dimmer. Standby loss of only 0.3 watts. Minimum speed, maximum speed and dimming speed can be set. 1 division unit. Motor dimmer with phase control for L-loads up to 300Watt, depending on the ventilation conditions. Only 1 fan...
Eltako 22100430 Current limiting relay capacitive 230V/240 microfarad. 1 NO 16A/250V AC Blue
Current limiting relay with 1 NO contact 16A/250VAC. No standby loss. 1 division unit. Maximum capacitive load 240 microfarad after rectifier (e.g. energy-saving lamps and ECGs) or 120 microfarad directly on the mains (e.g. parallel compensated fluorescent...
Eltako 22400601 Blinds controller
Motor isolating relay. Stand-by loss only 0.5 watts. 1 division unit. The tubular motors of shading elements and roller shutters must never be connected directly in parallel, as otherwise there will be back voltages via the limit switches and ultimately...
Eltako 22400602 Blinds controller IP20 Blue
DC motor relay. Stand-by loss only 0.07 watts. 1 division unit. The DCM12-UC can be operated in parallel, but requires free contact outputs K2/K3 of the controlling EGS12Z-UC. These are connected to terminals K2/K3 of the DCM12-UC. With a rotary switch,...
Eltako 23100704 TDR DIN rail 250 V AC
Lagging switch for fan control in the bathroom and toilet. The contact switching takes place to protect the contacts and devices in the zero crossing. The lagging time is from 1 to 12 minutes, response delay can be set from 0 to 12 minutes. With permanently-on-...
Eltako 23100800 TDR DIN rail 8 V DC/AC, 12 V DC/AC, 24 V DC/AC, 110 V DC/AC, 230 V DC/AC
1 closing contact not isolated 16 A/250 V AC, incandescent bulbs up to 2300 W, ESL and LED-lamps up to 200 W. Control voltage 230 V and/or 8..230 V UC. Switch-off pre-warning and scanner light can be attached. By-Verlust of only 0.5 W. With ESL-optimization...