Murrelektronik 7000-08041-0100500 Sensor/actuator connector 5.00 m No. of pins (RJ): 3 1 pc(s)

Additional technical information: Design: 8041Wire number/cross-section: 3× 0.25 mm²Wire insulation: PVC (br, bl, sw)Bending radius (moving): 10× Outer ØTemperature range (moving): -5...+80 °CCable identification: 10Cable weight [g/m]: 29.37Material (conductor): CU-strand, blankresistance (conductor): Max. 79 Ω/km (20 °C)Single wire Ø Wiresize:× 0.15 (AWG) Similar AWG 24Material (wire insulation): PVCWire-Ø incl. insulation: 1.25 mm ±5%Wire color/numbering: br, sw, blVerstrand network: 3 wires strandedShielding: noChemical resistance: Good oil, petrol and chemical resistanceThermal resistance: Flame resistant according to UL 1581 VW1 / CSA FT1Test voltage: 2000 V ACBending radius (fixed): 5× Outer-ØRated surge voltage: 1.5 kVLED display: noLocking of slots: Screw thread (M8×1 mm) recommended tightening torque 0.4 Nm, self-lockingmaterial (locking): Zinc die-cast, matt nickel-platedmounting type: Plugged, screwedpollution degree: 3; Cable colour: Yellow; Cable diameter: 4.5 mm; Cable length: 5.00 m; Connection side A (sensors/actuators): M8 socket, straight; Connection side B (sensors/actuators): Cable, open end; Contact material: Copper alloy; Contact surface: Au; Cross-section (sensor/actuator wiring): 0.25 mm²; IP rating: IP65, IP66K, IP67 (when connected); Jacket material: PVC; Max. temperature: +80 °C; Min. temperature: -30 °C; No. of pins (RJ): 3; Nominal current: 4 A; Nominal voltage: 300 V AC; Outside diameter: 4.5 mm; Thread type (wiring and installation): M8

Price: 9.99 from Conrad Electronic